Home | About Us | Customer Resources | Contact Us

Dump Box Model Asphalt Recycler / Asphalt HeaterDump_box_asphalt_recycler_asphalt_hot_box.jpg

Download the Dump Box Model Brochure

"Versatile Asphalt Maintenance Equipment - An Asphalt Recycler and an Asphalt Hotbox in one!"


CLICK HERE FOR A LIST OF BOLT-ON OPTIONS

The Falcon trailer model asphalt recycler / asphalt heater hopper holding capacity ranges from 2 tons to 4 tons.

The hopper on a Falcon asphalt recycler / asphalt patch trailer is capable of tilting to any angle from level up to 35º by means of two dual-actuated, hydraulic cylinders. Both the up and down cylinder motions are hydraulically controlled. The power source for cylinders controlling the movement of the hopper is a 12-volt self-contained electric over hydraulic pump. The dump box remote control is mounted at rear of hopper to allow the operator to view the material unloading door while lifting or lowering the dump box. The 12-volt pump is stored in a lockable toolbox mounted on the front of the trailer frame.

The Falcon diesel fired asphalt reclaimer / asphalt patch trailer has an in-line quick disconnect fuel filter with a water separator to prevent burner failure caused by water in the diesel fuel.

The fuel tank on the dump box model has a capacity sufficient for holding hot mix and heating cold mix for three 8-hour shifts or recycling a full load of asphalt millings. The tank is bolted to steel brackets that are welded to the front hopper wall. Attaching the fuel tank to the front hopper walls prevents fuel lines from getting pinched when the hopper is raised and lowered. The fuel tank neck is welded into the fuel tank. Welding instead of bolting the fuel neck into the tank prevents moisture from entering the tank. It is this type of attention to detail that makes Falcon the quality leader in asphalt maintenance equipment.

The Falcon asphalt reclaimer / cold mix hauler is equipped with a digital temperature controller. The temperature controller is easily adjustable in increments of 1 degree between 32 and 350 degrees Fahrenheit. The burner stops running when the temperature setting on the digital temperature controller is reached. When the hopper temperature drops 10 degrees below the temperature set on the temperature controller, the diesel burner will begin running until the set temperature is reached. The hopper burner turns on / off with a single toggle switch located inside the electrical enclosure.

Falcon standard paint colors include Safety Red, Safety Yellow and Safety Orange. Two coats of epoxy primer are applied to all parts and entire unit and two coats of urethane finish are applied with a six-mill thickness. The entire unit, including all bolt-on parts, is sand blasted prior to painting. All accessory bolt-on parts are painted prior to assembly to chassis. Non-steel parts (wiring, lighting, electrical enclosures, chains, etc.) are not painted. These components/parts are installed after the paint process is complete. Another example of why Falcon is the quality leader in manufacturing asphalt maintenance equipment.

IMG_0140.jpg

The Falcon dumpbox model is perfect for repairing potholes, replacing utility cuts and making larger asphalt repairs. And, like every Falcon asphalt reclaimer / cold mix hauler, the dump box model has a combustion efficiency rating of over 90%. A combustion efficiency rating this high provides significantly lower fuel usage, lower carbon and NOX emissions and less sooty waste by-product responsible for dirty cad cell condition --- lowering costs and helping the environment.